I was trying to get a rough idea of the frequency of the drip so to speak, I have seen a couple of payouts come through I’m now pushing 1 of my big rigs at it so doing over 2Mh/s so the drip is not to bad
I’m curious do I still need to cut the cables to remove it from going back to the board. Because I plan on being able to have 7 AMD R9 280x GPU’s in one rig. 5 x PCI-E X16 powered riser and 2 x PCI-E X1 --> PCI-E X16 powered riser
Basically they are these ones [url=http://www.moddiy.com/products/PCI%252dExpress-PCI%252dE-1X-to-16X-Riser-Ribbon-Extender-Cable-w%7B47%7DMolex-%252b-Solid-Capacitor-%2830cm%29.html]http://www.moddiy.com/products/PCI%2dExpress-PCI%2dE-1X-to-16X-Riser-Ribbon-Extender-Cable-w{47}Molex-%2b-Solid-Capacitor-(30cm).html[/url] and their PCI-E X16 --> PCI-E X16 equivalent as well… Do I need to do any modifications to keep it from frying my board or no?
Also I have planned on two Silverstone Zeus 1,350 Watt PSUs for my rig how should I connect them all? Can I use one PSU for say the motherboard, HD, and such plus 3 GPU’s and their powered Risers and the other PSU to the other 4 GPU’s and their powered risers?
[quote name=“chrisj” post=“46936” timestamp=“1387742795”]
Should this post be stickied in the Newbies Forum? Just because there are so many stickies now on the Main Discussion board.
[/quote]
Yep. We can probably move the Wordpress guide into guides and unsticky that from here, and the market moved message can probably be unstickied as well, since it’s in the site header.
First thank you very much for this write up (what is an appropriate FTC tip amount)
Second I am having a small issue (Linux Ubuntu)
Everything went very smooth except for the following:
zlib1g-dev This is a number 1 in front of the g? Or lowercase L? I can’t find this package
And Theese are my errors
Checking for gawk… No
Checking wether to enable maintainer-specific portions of makefiles…no
Checking wether the C compiler works…no
Configure error: in ‘/usr/local/cpuminer’:
Configure: error: c compiler cannot create executables
UPDATE: working and hashing Yay!!!
Fix: do the following
autoconf
automake
bison
build-essential
flex
gawk
libtool
You should be OK for compiling then.
This would be a great idea for making a Feathercoin Savings account for the long term investment. As a Miner I usually sell half of what I mine and keep the other half. Storing them on paper and in plastic sleeves in a binder would be awesome.
[quote name=“chrisj” post=“8038” timestamp=“1369903034”]
That’s very cool, good job. I could never get mine to work on my mac, which is a shame.
[/quote]Yeah, apparently the Xcode tools I need to make cgminer work in Mac requires more RAM than I have and an upgrade to 10.7/10.8 – no thanks. This old Mac Pro is doing just fine in 10.6 and everyone is telling me to not upgrade.
[quote name=“iawgoM” post=“21233” timestamp=“1373541307”]
Maybe just add information that user doesn’t have to worry about the wallet. Or does he in some cases? Nah, he doesn’t. Doesn’t he? ::). I know that first time I updated FTC client I was worried what will happen to my coins…backuped wallet.dat on x locations, just in case - but there was no need
[/quote]
I am not 100% sure, but let’s say something goes wrong and the wallet.dat will be overwritten or something. Better safe then sorry! hehe