Feathercoin daemon and wallet production version 0.18.3
Old daemon and wallet version 0.18.2

\[Miner Projects\] Post Pictures Of Your FTC Mining Rigs!


  • Regular Member | Tip Markus1337

    Hahahahhaha Tuck +1 😎


  • | Tip Tuck Fheman

    lel, didn’t notice the misspelling till now. Someone in the troll box said it, just copied/pasted. My apologies Afghanistan.


  • | Tip ShadowEW

    [quote name=β€œTuck Fheman” post=β€œ4066” timestamp=β€œ1368776499”]
    lel, didn’t notice the misspelling till now. Someone in the troll box said it, just copied/pasted. My apologies Afghanistan.
    [/quote]
    Still has the right affect πŸ˜›


  • Regular Member | Tip Drjones

    3 x 7950’s had to balance on case due to temp issues.

    [img]http://s22.postimg.org/6e43whmox/IMG_0493.jpg[/img]

    [img]http://s17.postimg.org/ufzmpt333/IMG_0494.jpg[/img]


  • | Tip UKMark

    [quote name=β€œDrjones” post=β€œ5083” timestamp=β€œ1369175263”]
    3 x 7950’s had to balance on case due to temp issues.

    [img]http://s22.postimg.org/6e43whmox/IMG_0493.jpg[/img]

    [img]http://s17.postimg.org/ufzmpt333/IMG_0494.jpg[/img]
    [/quote]

    Love the soup tins lmao πŸ˜ƒ makes my Paracord job look quite ordinary πŸ™‚
    I will dig the pics out now…


  • Regular Member | Tip Drjones

    Lol best i can do for now, not moved an inch for a month so should be ok πŸ˜ƒ


  • | Tip UKMark

    [quote name=β€œDrjones” post=β€œ5106” timestamp=β€œ1369177918”]
    Lol best i can do for now, not moved an inch for a month so should be ok πŸ˜ƒ
    [/quote]

    I take it you don’t have kids and pets then? πŸ˜ƒ

    Just noticed the back boxes too, you gotta be a spark πŸ˜›


  • Regular Member | Tip Drjones

    You got that rite!

    Dont have a clue about electrics to be honest only things i could find which though would not catch fire if got too warm πŸ˜ƒ


  • | Tip UKMark

    [quote name=β€œDrjones” post=β€œ5108” timestamp=β€œ1369178586”]
    You got that rite!

    Dont have a clue about electrics to be honest only things i could find which though would not catch fire if got too warm πŸ˜ƒ
    [/quote]

    Improvisation I believed its called πŸ˜ƒ

    I used some of my trusty Paracord and rusty bulldog clips for mine:

    [img]http://mtgoxlagometer.herobo.com/miner.png[/img]

    All housed in a thermostatically ventilated steel cabinet in my shed though πŸ˜ƒ


  • Regular Member | Tip Drjones

    Putting in the shed not a bad idea, not sure how long they be there for around here though!

    Was thinking about relocating mine for summer but dont think going to have to worry about temps as weather not looking great so far.

    Looked like gfx card jenga before seen that one was suspended πŸ™‚

    You have more than one rig in there see u have two power supplies.


  • | Tip UKMark

    [quote name=β€œDrjones” post=β€œ5113” timestamp=β€œ1369180160”]
    Putting in the shed not a bad idea, not sure how long they be there for around here though!

    Was thinking about relocating mine for summer but dont think going to have to worry about temps as weather not looking great so far.

    Looked like gfx card jenga before seen that one was suspended πŸ™‚

    You have more than one rig in there see u have two power supplies.
    [/quote]

    Believe me I live in a rough ass place in the NW UK, I just let my Rottweiler patrol it πŸ˜ƒ

    Two power supplies but only one rig (green/black wire shorted + 5v pull down on the slave PSU), I was looking at quality 1000w PSU’s and they were in excess of £140+ I found 2 x quality OCZ 550’s With SLI 6pins for less than 1/2 that price, it was a no-brainer decision tbh.


  • | Tip deroekeloze

    i’ll play 😎

    http://imgur.com/a/bEUNg#0 = miner 1 - 3 x MSI 5850 @ 367KHs a piece. undervolted + 125 core bump. they’ll run higher, but i’m content with the output πŸ˜›

    miner 2 (no pics) is unfinished but similar crate configuration. it sports a single 7950 @ 550 Khs (visiontek pos 😠 ). i have 2 more 7950s (MSI) and some 1X risers on the way. they need to get here soon πŸ˜‰


  • Regular Member | Tip Drjones

    Looks good, my plan was to use a create but didnt get around to getting one in end.


Log in to reply