Supported Feathercoin client versions: Current production Version: 0.16.1.
Old Production Version: 0.16
Info: If you have problems to post, create one post in the ‘newbies’ category and try again. If you have further problems, find support under Guides
Can't start mining...?
@tobi97l Thanks Tobi that makes alot of sense. I am getting a solid 800Kh/s. I’ve been using CCMiner since I started, that’s running my GPU in the command window posted two replies above.
@wellenreiter Hey Well, thanks for recommending CPUMiner. I looked though the “README” and went to the forums for Q&A. https://bitcointalk.org/index.php?topic=55038.0 there in it states a “minerd.exe” to which the archive doesn’t have that file. The post was made in 2011, so its not a shock that the file may not longer exist in a new build. It does have a “minerd.1” file. In short, I have no bloody clue how to make this work either.
It does have a “minerd.1” file. In short, I have no bloody clue how to make this work either.
You got the source code, which needs to be compiled to create minerd.exe
It may be easier to get the binary from here: https://github.com/ghostlander/cpuminer-neoscrypt/releases
If you search for ‘minerd’ here in the forum you’ll find several examples how to start minerd from the command line.
@wellenreiter Thanks Well. I created a new worker profile and basically copied the info from the .bat file you guys had me create to start CCMiner. Changed the info to the new worker.
minerd.exe -a neoscrypt -o stratum+tcp://pool.feathercoin.com:6056 -u ClickinOrka.xxxxxx -p xxxxxxxxxxxx
Took a short while but they worker did appear on my “dashboard” for a brief moment. However with 6 cores, it only appeared to provide 36kh/s across all 12 threads. That can’t be right???
I’d like to think I can muddle though, read previous Q&A’s and learn without bugging all yall, but I’d also like to get it right and not half ass it. Please let me know if I made a mistake. I’d have thought that a hexcore processor would do more then 1 video card.
Well, I can’t tell much, but your CPU’s get about the same hash rate I got when trying CPU mining.
I move the thread to the mining section, so other the mining people may respond also.
You should be able to post in the mining section, too now.
ClickinOrka last edited by ClickinOrka
@wellenreiter Thanks Well. It all goes well now aside from the CPU part. Been a good 3-4 days and I can’t make it more than a mere few, like the pic posted above. Is there a special address I should be connecting to for the CPU side? The CPU worker doesn’t appear most of the time, and when it does, its up for a moment and is gone again. Seems to be 99% ignored. So it does do its thing, just doesn’t seem that credit is being given for the effort. CPU miner is 2.4.3.
Tobi97l last edited by
My guess is that cpu mining neoscrypt is just that inefficient. I never tried it myself though.
Currently i am mining monero with my cpu and feathercoin with my gpu. I then use miningpoolhub to exchange my monero to feathercoin automatically.
@clickinorka If your cpu miner’s worker is showing up only temporary on the pool page, the stratum difficulty is so high, that the time the cpu miner needs to generate and send hashes to the pool is to long.
Most pools allow manual setting of the stratum difficulty for a given worker. Check the worker’s configuration on the pool and set the diff to a lower value, e.g. something like 64 or even 32. Then the pool sends ‘easier’ computing tasks to your cpu miner and it can respond faster.
@wellenreiter Thanks Well. I searched around trying to reduce the difficulty, there doesn’t seem to be a modification setting in the workers config MyAccount>MyWorkers. I switched up the connectivity to port 3028 so the difficulty is lessened but there didn’t seem to be a change. Its all good, for now Ill stick with things on the GPU side I guess til I learn more.
Hi! What miners and software exactly you use? I want to start mining but such issues look a bit frightening. Now I choose between traditional mining and cloud because the latter provides more user-friendly and easy-to-start options with discounts (like this http://ccgminingcode.com/). So, would be cool to know your equipment, profits and possible problems to compare these approaches. Waiting for your reply.