Feathercoin daemon and wallet production version 0.19.1
Old daemon and wallet version 0.18.3

Open Source ATM


  • administrators | Tip uncle_muddy

    I’ve got a couple here, but thanks for the offer 🙂

    I’m not seeing anything in the code to drop pin3 to ground thou but I may be missing it.

    I have the log file sorted now that I have added a statement to call it that was missing. Just need to look at the RTC as the date is rubbish!!

    I also need to work out how to get the modified code onto Github as I have no idea about that, if nothing else comes of this I can say I have learnt a fair bit 😃


  • administrators | Tip uncle_muddy

    I suspect that the RTC is the problem with the logfile, as it’s logging data just not what I was expecting from reading the code

    This is the output

    Feathercoin Transaction 1265845585,2165/165/165 165:165:85
    Feathercoin Transaction 1265845585,2165/165/165 165:165:85
    Feathercoin Transaction 1265845585,2165/165/165 165:165:85

  • | Tip null

    This is so sweet guys… Truly epic… If we can have a working prototype to show the world during the 1 year anniversary, it could get a lot of attention.


  • administrators | Tip uncle_muddy

    @Calem I’m hoping for more than one by then 🙂

    This should be good to go before the next meet up just need to find some one to do the sticker printing as I only have access to powered coaters so its going to look very boring

    UM

    EDIT *** 500 posts 🙂 ***


  • Regular Member | Tip prensel

    I can cut stickers if you like ?

    Just sent me an illustrator file and size/color of the vinyl and its a cut 🙂


  • administrators | Tip uncle_muddy

    @prensel, thanks man… I’ve just Skyped iawgoM about that artwork but he’s not on-line yet…

    Can you do vinyl stickers with a spot gloss finish? something similar to this? as I think the circuit tracks would look very cool in gloss 🙂 then all I need to do is think of a colour for the can, but that maybe limited to whats in the spray gun at the time of taking it in due to the time constants of getting it ready for the end of the month

    UM


  • administrators | Tip uncle_muddy

    RTC problem is now fixed, I get a log file that makes sense…

    Next thing is shutting down the taker when it runs out of codes, I don’t mind that it keeps swallowing £1 coins but the punters might get a little feed up of it. I’ve just been to the cupboard where the parts are kept to get a relay and there is none in there, I can’t remember using any… will have to pop out again later and get a couple


  • administrators | Tip uncle_muddy

    Current casing design is this…

    casing_1_zps140be832.jpg

    Vertical slot is for coin taker, horizontal slot is for printer, hole on the end is to take a standard PC PSU…

    Thoughts? This is ready to go off to the laser cutters, and due to time constraints to get it ready for the OB at the end of the month, I need to push the button tomorrow lunch at the latest

    UM


  • | Tip null

    If you think your ready I say go for it!


  • administrators | Tip MrWyrm

    UM, you need a tip jar!


  • administrators | Tip uncle_muddy

    I had one, but took it out of my sig whilst the PCUK is going on as I didn’t want to cause confusion

    Oh and I pushed the button on the laser cutting this morning 🙂 so hopefully they will be here next week 😃


  • administrators | Tip MrWyrm

    Ahh, makes sense.


  • | Tip scruffters

    This is insanely cool! Just read the whole thread 😎


  • administrators | Tip MrWyrm

    Can we make a feathercoin bandit?


  • | Tip spynappels

    Started coding V2, Just will need to make a few changes which will allow accepting of all coins (10p and up) and vending different values of FTC in whole pound increments. Sitting in an airport lounge, will elaborate later.


  • administrators | Tip uncle_muddy

    This is insanely cool! Just read the whole thread 😎

    Thanks, when I’m done I will tidy it up and put it somewhere safe for a rainy day and let all the dev work fall to the bottom of the pile, but still be around for referance if anyone wants it. Trying to wokr out how to use GitHub at the moment :-\

    Can we make a feathercoin bandit?

    I don’t see why not… but I think that is going to need ATM v2 to be ready 1st, I’ll look into it a bit during an insomnia moment and get back to you


  • administrators | Tip uncle_muddy

    Started coding V2, Just will need to make a few changes which will allow accepting of all coins (10p and up) and vending different values of FTC in whole pound increments. Sitting in an airport lounge, will elaborate later.

    You are a god!!!

    Are we still going for the Pi route? I need to add you to my Skype thingy so we can talk about this at some point.


  • administrators | Tip MrWyrm

    I don’t see why not… but I think that is going to need ATM v2 to be ready 1st, I’ll look into it a bit during an insomnia moment and get back to you

    Was just smashing an idea down on paper whilst it was in my head. But seems like a natural extension to an ATM in the pub haha.


  • | Tip scruffters

    Thanks, when I’m done I will tidy it up and put it somewhere safe for a rainy day and let all the dev work fall to the bottom of the pile, but still be around for referance if anyone wants it. Trying to wokr out how to use GitHub at the moment :-\

    Takes a bit of time to get used to it, but once it clicks you’ll wonder how you managed without it 🙂

    Keep up the good work.


  • | Tip spynappels

    Ok, so for V2 I was hoping to make some changes that would allow multiple different coins to be used, and a 16 x 2 LCD screen to show how much fiat has been inserted and a big vend button, which starts the printing of the QR codes when the required value of coins has been inserted. This would still run on Arduino, but it would allow me to evaluate more complex codes and functions.

    Individual QR codes would still need to be generated, and a lot more of them as conceivably (a lot) more than one QR can be printed per vend.

    I see the Pi as being more of a V3 or 4, as I need to see about the best way to port the code. Does that sound ok to you UM? There would be 2 further (little) cutouts in the box but that can be sorted later.


Log in to reply