Feathercoin daemon and wallet production version 0.19.1
Old daemon and wallet version 0.18.3

Wallet slow to sync


  • | Tip jimmy24651

    @channard To each their own…

    I personally LOVE the idea of being able to invest in a SOLID coin, such as FTC at such a ridiculously undervalued price as we see currently. I am willing to put up with a few headaches (if waiting for a wallet top sync can even be misconstrued as such) to get in early!


  • | Tip jimmy24651

    @channard And for the record…every windows-based wallet I’ve downloaded has taken quite a while to sync to blockchain…it’s not like FTC has some type of an issue. It just is what it is…if you’re going to use a wallet which synchronizes with the entire chain, you have to be patient. I seem to remember hearing a few people in my life who were older and wiser than myself say something along the lines of “patience is a virtue”.


  • Moderators | Tip wrapper

    This has been a major support issue, the new version 0.9.6.2 coming out should make it a lot quicker. I will not be sad not to see sync issues problems a thing of the past.


  • Regular Member | Tip MadHawk

    @acidd I downloaded this file but am running the wallet on my mac. I tried to find the library on my mac but can’t find it. Is it the same dbase and where should I save it on a mac?

    My wallet is synchronising but running for a full week now. Checking the debug window/networktraffic it shows block being send and received of 40KB/s.
    My bandwidth is about 45Mbps down.
    1.719.992 blocks done.

    Thanks


  • Moderators | Tip AcidD

    @MadHawk

    You need to go here:

    ~/Library/Application Support/Feathercoin/
    

    If you’re on MacOS you can either try this Bootstrap.dat file or you can wait a day or two - we are going to release 0.9.6.2 which has a much faster sync than 0.9.6.1


  • newbies | Tip marthkoopa

    I downloaded the updated wallet but it’s still extremely slow to sync. Did I do something wrong when updating? Uninstalled 0.9.6.1 64bit before installing 0.9.6.2 32bit and kept the appdata folder as it was


  • Moderators | Tip Wellenreiter

    no, you did everything right.

    with version 0.9.6.2 the sync still needs several hours to complete


  • Regular Member | Tip Arnie

    @madhawk
    Follow this procedure to open your Library folder:
    Click your “username”
    Go to Finder and click “Go”
    Press the “Alt” button and you’ll see “Library” appearing
    Click on “Library” while holding “Alt” button
    “Library” folder opens and go to “Application Support” folder
    Look for your “Feathercoin” folder


  • Moderators | Tip AcidD

    @arnie said in Wallet slow to sync:

    @madhawk
    Follow this procedure to open your Library folder:
    Click your “username”
    Go to Finder and click “Go”
    Press the “Alt” button and you’ll see “Library” appearing
    Click on “Library” while holding “Alt” button
    “Library” folder opens and go to “Application Support” folder
    Look for your “Feathercoin” folder

    This is for MacOS only. And not windows 32bit


  • Regular Member | Tip Arnie

    @acidd
    That’s correct


  • newbies | Tip dblmw

    Thank you to everyone in this thread - I am working through the same issues and using this thread to move the process of sync my wallet. Sync Feather = right of passage 😉


  • newbies | Tip 5v3nla

    Hi,

    the link to https://ufile.io/8ysgb is not longer valid (unless you subscribe to their premium contract). Can someone republish it please?

    I’m on 0.9.6.2, but sync is still only half way through (block 1023813) after 24hrs…


  • Moderators | Tip wrapper

    @5v3nla said in Wallet slow to sync:

    Hi,

    the link to https://ufile.io/8ysgb is not longer valid (unless you subscribe to their premium contract). Can someone republish it please?

    I’m on 0.9.6.2, but sync is still only half way through (block 1023813) after 24hrs…

    You are past any problems in the sync. Even if you download blockdat, it still has to be checked by the system, which is the thing that takes time.


  • newbies | Tip 5v3nla

    It’s been running for a week now… block 1770805… this is ridiculuous…

    I have dozens of wallets in other altcoins… none of them took longer than a day.


  • Moderators | Tip wrapper

    Are you ate your PC now, is the wallet open? can you click on, settings, debug window, console tab,

    then type

    getinfo
    

    then :

    getpeerinfo 
    

    May help diagnose why you are slow.


  • Moderators | Tip AcidD

    @5v3nla said in Wallet slow to sync:

    It’s been running for a week now… block 1770805… this is ridiculuous…

    I have dozens of wallets in other altcoins… none of them took longer than a day.

    I posted earlier in this thread. one of the main reasons why the sync is so slow is that Feathercoin was attacked a lot in the early days in 2013/2014 that caused a few orphan chains on the network that have to be processed.


  • | Tip j0k3rhd

    Wallet Still Syncing, But its all gotta be done, So may aswell forget about it and let it do its thing.

    IM currently standing at 43 weeks left to go.

    Im Currently updating off a samsung T3 drive and the speeds seem ok 🙂


  • Regular Member | Tip engetsu

    I’m stuck 34 weeks for the past 3 days , i added many nodes but it wont move . Stuck on 1673771 .

    how can i fix this

    {
    “version” : 90602,
    “protocolversion” : 70006,
    “walletversion” : 60000,
    “balance” : 0.00000000,
    “blocks” : 1673771,
    “timeoffset” : 0,
    “connections” : 10,
    “proxy” : “”,
    “difficulty” : 11.80062474,
    “testnet” : false,
    “regtest” : false,
    “keypoololdest” : 1510897040,
    “keypoolsize” : 101,
    “paytxfee” : 0.00000000,
    “relayfee” : 0.01000000,
    “errors” : “”
    }

    19:30:11
    [
    {
    “addr” : “46.127.12.33:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038593,
    “lastrecv” : 1513038578,
    “bytessent” : 5842,
    “bytesrecv” : 98252,
    “conntime” : 1513038451,
    “pingtime” : 0.00000000,
    “version” : 70005,
    “subver” : “/Feathercoin:0.9.6.1/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : true
    },
    {
    “addr” : “50.43.47.187:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038570,
    “lastrecv” : 1513038522,
    “bytessent” : 480,
    “bytesrecv” : 30428,
    “conntime” : 1513038452,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 342315,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “142.118.58.13:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038581,
    “lastrecv” : 1513038581,
    “bytessent” : 4771,
    “bytesrecv” : 49392,
    “conntime” : 1513038452,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “159.100.247.136:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038608,
    “lastrecv” : 1513038577,
    “bytessent” : 4997,
    “bytesrecv” : 53219,
    “conntime” : 1513038453,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “104.129.57.113:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038577,
    “lastrecv” : 1513038577,
    “bytessent” : 3625,
    “bytesrecv” : 94025,
    “conntime” : 1513038454,
    “pingtime” : 0.00000000,
    “version” : 70005,
    “subver” : “/Feathercoin:0.9.6.1/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “193.108.117.202:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038577,
    “lastrecv” : 1513038577,
    “bytessent” : 3796,
    “bytesrecv” : 49478,
    “conntime” : 1513038454,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “74.80.53.118:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038608,
    “lastrecv” : 1513038611,
    “bytessent” : 4948,
    “bytesrecv” : 50026,
    “conntime” : 1513038460,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “23.92.136.71:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038577,
    “lastrecv” : 1513038606,
    “bytessent” : 4826,
    “bytesrecv” : 49840,
    “conntime” : 1513038461,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 2001307,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “5.81.243.54:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038513,
    “lastrecv” : 1513038513,
    “bytessent” : 370,
    “bytesrecv” : 346,
    “conntime” : 1513038461,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 767163,
    “banscore” : 0,
    “syncnode” : false
    },
    {
    “addr” : “71.229.233.189:9336”,
    “services” : “00000001”,
    “lastsend” : 1513038469,
    “lastrecv” : 1513038470,
    “bytessent” : 370,
    “bytesrecv” : 346,
    “conntime” : 1513038468,
    “pingtime” : 0.00000000,
    “version” : 70006,
    “subver” : “/Feathercoin:0.9.6.2/”,
    “inbound” : false,
    “startingheight” : 1157131,
    “banscore” : 0,
    “syncnode” : false
    }


  • Moderators | Tip Wellenreiter

    @engetsu

    Your wallet currently -or at the time you got the list of peers- syncronizes with this node : “46.127.12.33:9336”

    Try to close the wallet and start again.

    This has been reported to get hanging synchronizations to move again.

    After starting the wallet again, you can check that the wallet uses a different node to download data.

    This is reflected in the ‘syncnode’ flag of the peers.


  • Regular Member | Tip engetsu

    @wellenreiter
    Thanks for the info , i closed and opened it many times and it still hangs there , on information tab i number of connections see 10 ( in = 0 / out = 10 )

    When i restart , i always get a different address showing True but it stays hanging .

    What do i do now ?


Log in to reply