Forum Home
    • Register
    • Login
    • Search
    • Recent
    • Tags
    • Popular

    Finally got the rig... no monitor signal

    Support
    6
    12
    2348
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      Aldanga last edited by

      Did you connect the CPU power pin to the motherboard?

      If not, reseat the RAM and see if it boots. Then try different slots and alternate sticks until you can get something working. If all else fails, reseat the CPU.

      1 Reply Last reply Reply Quote 0
      • Z
        zythen Regular Member last edited by

        Hook up a speaker too if you have one. You may be missing error beeps that will hint for an issue.

        1 Reply Last reply Reply Quote 0
        • F
          fher98 last edited by

          [quote name=“Aldanga” post=“11964” timestamp=“1370821760”]
          Did you connect the CPU power pin to the motherboard?

          If not, reseat the RAM and see if it boots. Then try different slots and alternate sticks until you can get something working. If all else fails, reseat the CPU.
          [/quote]

          I bet thats it… I really hope so! Gonna read where is it and write back any findings… thanks.

          1 Reply Last reply Reply Quote 0
          • N
            Nutnut Regular Member last edited by

            [quote name=“Aldanga” post=“11964” timestamp=“1370821760”]
            Did you connect the CPU power pin to the motherboard?
            [/quote]

            Good call.

            Also if using HDMI, try to swap it for DVI. I have a couple of card/mobos that wont boot with HDMI until the bios is set properly.

            Shouldn’t the RAM be in the blue slots?

            1 Reply Last reply Reply Quote 0
            • F
              fher98 last edited by

              [quote name=“Nutnut” post=“11992” timestamp=“1370825148”]
              [quote author=Aldanga link=topic=1462.msg11964#msg11964 date=1370821760]
              Did you connect the CPU power pin to the motherboard?
              [/quote]

              Good call.

              Also if using HDMI, try to swap it for DVI. I have a couple of card/mobos that wont boot with HDMI until the bios is set properly.

              Shouldn’t the RAM be in the blue slots?
              [/quote]

              Well im using the little converter for DVI. I tried the RAM in the blue ones too… no luck :-( also I read in the booklet installation that in the white ones they get priority.

              Im still finding out where that pin is

              1 Reply Last reply Reply Quote 0
              • S
                sl1982 last edited by

                Its normally a 4 or 8 pin connector on the motherboard

                1 Reply Last reply Reply Quote 0
                • N
                  Nutnut Regular Member last edited by

                  looks like one of the pci power sockets like on your graphics cards.

                  it will most likely be 4pin. The psu should have an 8 pin plug that splits in half with black and yellow cables only. It will possibly have a label of “CPU”

                  Socket should be near the CPU.

                  1 Reply Last reply Reply Quote 0
                  • F
                    fher98 last edited by

                    Found on the little manual where the pin was… nowadays is an eight pin. As soon as I got to work went and plug the thing in… everythin worked :-)

                    thank you

                    1 Reply Last reply Reply Quote 0
                    • N
                      Nutnut Regular Member last edited by

                      Bravo!! ;D

                      1 Reply Last reply Reply Quote 0
                      • A
                        Aldanga last edited by

                        Glad to hear you got it sorted. :)

                        1 Reply Last reply Reply Quote 0
                        • D
                          Davereplicant Regular Member last edited by

                          I had a similar experience with an Asrock Mobo.
                          No signal from my ati 5860 card
                          I had to update the bios to get any display signal.
                          Once the bios was flashed I had a working system- I sent one card back before I figured this out!
                          Getting the correct open cl drivers loaded to successfully mine was another story.

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post