Www.cgminer-config.com - site with cgminer scrypt configs :)
-
Awesome initiative! :)
I’ll upload my successful configs I’m running as soon as I get some time on my hands!
-
I have moved this to mining, it is more appropriate. I’ve message to say I will pin it as well, to see if we get more replies there. Good job. Rep +
-
[quote name=“motherlode1” post=“55824” timestamp=“1390989890”]
You are a god man. May I post this to the Reddit Feathercoin page.
[/quote]
ofc, its even recommended to do so :P -
Just a suggestion. I think you should include an extra column for clock speeds. I am pretty sure some of the results posted are not running on stock clocks. There is definitely some overclocking going on.
-
[quote name=“motherlode1” post=“55983” timestamp=“1391065446”]
Just a suggestion. I think you should include an extra column for clock speeds. I am pretty sure some of the results posted are not running on stock clocks. There is definitely some overclocking going on.
[/quote]
I might be wrong, but isn’t chaning clock speeds in cgminer.conf a best way to do that? -
Hey Good Job passing this on. Its tough to want to share good info sometimes. I may need to pull my config info and load it up. I’m pretty proud of my 750 Khash on 7970’s.
-
nice fine, but I wish the one that put up the Saphire Dual-X put up his setting and not his setup… lol I want to know how to get 650
-
Should add an extra column or separation to cover the different algos, what works for scrypt isnt necessary the best for scrypt-jane, keccak and so on :)
If you wanted to make it more popular for the general public that might be a good idea to include.
Appart from that, great work! 8)
-
I Shall upload my 7970, 6950 and what ever my other card is when I get a chance :)
also a nice feathercoin logo in the top corner would look nice 8)
-
I’ve got my Gigabyte R9 270 2Gb OC edition running at 480kHash/s under BAMT SMOS and 475kHash/s under Windows 7
I’ll find some time to post em. Might even see if I can stabilise over the 490 mark :D Time for some more tweaking I think :D
-
This is great! Hopefully there will be a bunch of configs there soon to compare!
+1 rep +bookmark
Hey IawgoM, great sweet spot on the TC, did you get any HW errors with these settings? I have two rigs of 270x Toxics and on each rig there were slight HW errors on 1 card. I took engine down to 1170 which sorted it, did you have to do the same mate?
-
Hey, well as for TC - I was looking for people’s configs and tried a few numbers - this one turned to be the best. Who knows, maybe it could be even better. Actually, there was some HW errors - but nothing to be worried about, just 2-3 on each GPU during the day. I can try what you suggested and see if that helps.
Can you send your current config? How much do you get from each GPU? If I use I 20, they give me 503-504 khash/s, but then I have occasional rejects.
The TC is Shaders (1280) multiplied by 17 minus 3 sets of 64. The person who found that sweet spot did his config right. I’m getting 495 per card stable using your settings, I just turned engine down to 1170. I’m only just started normal scrypt mining with those rigs, I was mining Vert with Kev Vertminer which is a fork of Vertminer that uses a concept of rawintensity. Its a whole other ballgame…
-
Hey, well as for TC - I was looking for people’s configs and tried a few numbers - this one turned to be the best. Who knows, maybe it could be even better. Actually, there was some HW errors - but nothing to be worried about, just 2-3 on each GPU during the day. I can try what you suggested and see if that helps.
Can you send your current config? How much do you get from each GPU? If I use I 20, they give me 503-504 khash/s, but then I have occasional rejects.
I tell a lie mate, I just found 2 cards dead on one of my 270x rigs, I’m taking it down to 1165 engine and will report back…
-
I normally go down in steps of 5 until I find stability…
-
Any chance of uodating this page for the neoscrypt?
-
I am running neo-gpuminer 3.7.8 on xubuntu 14.04.1 LTS using AMD Catalyst 14.9 driver for two Sapphire Toxic 270xs.
avg :143.4Kh/s avg
WU: 125.4/m
Rejects at 1.4%
{
“pools” : [
{
“url” : “stratum+tcp://sktpools.com:19327”,
“user” : “6qfZSLZiqAxMpB4C3H9R6P7WK2Dyjx9nNN+.000192”,
“pass” : “rotag”
}
]
,
“intensity” : “12,12”,
“neoscrypt” : true,
“shaders” : “1280”,
“thread-concurrency” : “8193”,
“auto-fan” : true,
“worksize” : “96”,
“gpu-threads” : “2”,
“queue” : “0”,
“scan-time” : “1”,
“expiry” : “1”,
“kernel-path” : “/usr/local/bin”
}
