Flashing 7950 gigabyte
-
O sorry forgot to say voltage is also not showing in afterburner can’t see a figure what does everyone use for this I seen some nice GUI software for pool mining somewhere with lots of options
-
Ok so with playing I got cgminer running :D
Got a nice constant 1.990mh/s
Temps all around 70 and 0 how errors
Time for bed lol
-
Nice work, what bios did you use in the end?
-
f43 are the way to go they change voltage down to 0.975 also so should be saving bit of power per card from the stock 1.25 they were. Fans now running lower too.
Average 1.986mh/s
Roughly 660 per card from 590 using old bios and GUI miner.Cgminer took abit to work downloaded loads of different versions, in the end used the cgminer I already had in GUI miner folder and works a treat, there are quite a few stats on there so not 100% sure all is as should but will post screen shot later.
Followed article on rumorscity website if anyone else is interested, google flash bios 7950 litecoin and will be first result.
-
One thing not sure about is power consumption I have a corsair 850 gold or plat not sure which and use these 3 cards any idea on wattage?
Need to invest in power meter now think
-
So finally got my power usage plug and abit surprised, it’s showing average 940w on my 850 corsair psu hmmm zit has been running stable should I lower gpu clock and mem?
Also it has a cost part 00.00 where I put my 12.04 per kW price not sure if it should be 00.12 or 12.04 confusing. ???
Any idea on cost per day on that price per unit?
Thanks
-
Feather calculator showing 1.92$ and ukpower.co.uk showing 2.75£ ???
Forgot to change wattage :) that’s correct @ 2.75 Gbp perday.
Is it safe on my psu running 100w over it’s rated ?
-
which bios are you flashing it with? beware of the dreaded ft0 cards
-
Not sure what the original bios was but changed it to the f43 lower clock as standard and lover voltages
-
F43 is the way to go with these cards. :)